OMS-18 Hydraulic motor

OMS modular series hydraulic motors are designed for walking drive of work pieces or equipment with compact structure and size elements and high output torque. OMS motors based on modular design, easy to match with any structure (whether wheel or shaft output, with or without brakes......) Are the ideal partners to get your work done.

This series of motors has the following main features:

1. Modular design;

2, high efficiency;

3, high working pressure, low speed performance;

4, can bear radial and axial load;

5, with mechanical brake.

OMS motor has formed 10 series of more than 100 specifications, the displacement range of 172-15000ML/r. It can be widely used in engineering machinery, construction machinery, mining machinery, lifting and transporting equipment, heavy metallurgy machine, geological drilling and other equipment, especially suitable for driving wheel walking mechanism.

In my work, customers often complain that the performance of the motor is not very good. However, through analysis of many problems, it is found that the OMS-50 hydraulic motor has a wide range of non-standard applications in specific applications, leading to poor performance or destruction of the motor.

Assembly (1) The assembly of cycloidal hydraulic motor fixed rubber bearing should have sufficient bending stiffness. When the system software has the influence of working pressure, the motor is not allowed to vibrate, so it is easy to destroy the motor.

(2) The input and output shaft of the QJM hydraulic motor should be connected with the coaxial axis of the shaft coupling axis.

(3) When the oil inlet and return of the motor is seamless steel pipe, the internal stress of the pipeline should be completely removed, and the mutual force effect of the pipeline is not allowed on the motor. When connecting the drainage pipeline, the oil return friction resistance should be in the following 0.3MPa, independent connection oil box, do not connect with other oil return pipelines, if the oil return friction resistance (back pressure type) is too high, it will cause the motor's technical performance will be affected.

(4) Before the end of the motor installation, the motor shell should be filled with cleaned gear oil from the two oil holes. Rotate the export shaft, if no abnormal can be installed by computer.

(5) The axial load borne by the motor export shaft need not exceed the standard value, otherwise it may harm the stability of the motor and reduce its service life.

(6) When the motor is put into operation for less than 200h, the oil should be changed and the oil filter should be cleaned.