News

Milling machines are widely used in various construction fields, including tunnel and ditch excavation, municipal pipeline excavation, highway pavement breaking, mining, rock and frozen soil excava...

The piston operates under conditions of high temperature, high pressure, high speed, and poor lubrication. The piston is in direct contact with high-temperature gases, with instantaneous temperatur...

The significant advantages of this motor model are reflected in three aspects: First, its high-efficiency power transmission capability enables it to achieve a mechanical efficiency of over 90% at ...

Installing a hydraulic motor is not a simple matter of splicing together; the installation of a Rexroth hydraulic motor also requires technical expertise.

The first oil change should be performed after 200-300 hours of operation. During subsequent use, the oil quality should be checked regularly, and any oil contaminated with impurities or deteriorat...

The main characteristics of worm gear reducers are their reverse self-locking function, large reduction ratio, and the fact that the input and output shafts are not on the same axis or plane.

A speed reducer is an independent component consisting of gear drives, worm gear drives, or gear-worm gear drives enclosed in a rigid housing.

A auger drill is a mechanical device that performs drilling operations by rotating a drill rod. It is commonly used in foundation construction, utility pole installation, and tunnel excavation.

A auger drill is a mechanical device that performs drilling operations by rotating a drill rod. It is commonly used in foundation construction, utility pole installation, and tunnel excavation.

Before operation, the work area should be free of high-voltage lines and clearly marked or fenced off; unauthorized personnel are prohibited from entering. Personnel must wear safety harnesses when...

The applicable geological conditions for auger drill bits vary depending on the type and structure of the drill bit. Soil auger drill bits are suitable for soil layers above the groundwater level, ...

The drill tip, connecting flange, and drill rod of a spiral drill bit are typically made of high-carbon steel with precision machining to enhance wear resistance.